Our office will close at 5pm on Thu 19th December and will re-open at 8.30am Wed 8th Jan 2025.
Our online store will be open for this period but all orders will not be despatched until the week of the 13th Jan 2025
Our office will close at 5pm on Thu 19th December and will re-open at 8.30am Wed 8th Jan 2025.
Our online store will be open for this period but all orders will not be despatched until the week of the 13th Jan 2025
New
Normal
Holden V8 253/308 Hydraulic
Crow Cams 'Tough Idle' Cam Range
Hot Rod and Street Machine builders often ask for cam combinations that will produce a tough idle and engine note without sacrificing street driveability or engine reliability. The range of Crow tough hydraulic grinds
are designed with increased overlap to produce a lumpy idle that will stand out in the crowd.
Options are available for standard or hi stall converters with good power and strong torque through the RPM range.
Please note tough cams will have low vacuum due to the tight lobe centre.
| RPM Range | Part No. | Duration | with 1.65 Rocker | Lobe Sep Angle |
Lash
Measured Hot |
|||||
|---|---|---|---|---|---|---|---|---|---|---|
| Advertised | @.050” | |||||||||
| IN | EX | IN | EX | IN | EX | IN | EX | |||
| 1500 - 4800 | 5666-8 | 268° | 288° | 204° | 214° | 0.481 | 0.512 | 108 | HYD | HYD |
Must use performance springs.
Must use performance retainers.
Converter stall speed should be equal to or greater than the minimum RPM of the cam power range
Please note: RPM Range is to suit 308. For 253, RPM Range add 500 RPM.